Electric Martini
Shop the cloud.
Kasco Marine Model 3400H 3/4 HP Water Fountain Aerator
The 3400H Water Fountain Aerator features an environmentally friendly oil-filled motor with a hard-face internal mechanical seal and external lip seal for protection against leaks. Overall this is a highly efficient fountain. Lower power consumption than competitive equipment makes it affordable in the long term as well as at the time of purchase. The 3400H operates at 3.4 amps. Superior dependability in salt water and other corrosive environments. This fountain can even be used in shallow water operation-- as little as 18 of water is sufficient. Requires little maintenance - we recommend cleaning the stainless steel motor housing once or twice per year.Safety- Kasco fountains are ETL approved to UL and CSA standards as an entire packageMotor- Kasco fountains are 1750 RPM which allows less wear and heat and gives longer seal and bearing lifePackage- Kasco fountains are a complete package including float control power cord mooring ropes motor and nozzlesEnergy Efficiency- Kasco fountains feature low amp draw with high flow rates per kW of per usedRepair Costs- Kasco fountain repairs are much lower cost and are done very quickly either through their repair facility in Wisconsin or at many locations scattered all over the United StatesFlow Rates- Kasco flow rates are proven to be much higher through independent flow rate tests which gives better aeration for improved water quality holds up to wind better and clogs lessMost affordable aerating fountain of its type. Lightweight and easy to install. Large clog-resistant decorative pattern - 21' diameter x 6 ' high. 3400H 240V model includes the C-75 240V Unit Control featuring GFCB protection timer lightning arrestor and a light-ready low voltage transformer in a rainproof enclosure. Longer-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation. All external metal motor float and hardware components are of stainless steel composition and protected by a sacrificial zinc anode. Standard unit includes a 100' power cord and two 50' mooring lines. The 350 should be ordered for the 3400H since the lighting transformer is included in the C-75.